It has been a crazy month!

After the chaos of the last post, we left on a 10 day cruise to Alaska on June 21st.  This was to be relaxing but on the 23rd the Montgomery County Woodturners president announces he was stepping down due to illness.  I had been thinking about this for some time but didn't think I was ready.  But on July 1st I announce to the officers that I will take it on and be president.  My son is headed off to college and daughter is in 11th grade so I will have some time.  Most of my child related sports have now gone south.  I still have a lot of anxiety for doing this.  I am not the natural leader, nor am I good talking to people but I can turn it on and I have some support from former presidents and officers.  I take the office with several other positions empty or soon to be empty and that concerns me a lot.


While we were gone a huge derecho cut a wide swath through the area and power was out for several days all around us.  I hear that we lost power for 4 hours.  We have been very lucky here!  On the way in the house @ 11:30 pm July 2 we notice that the mailbox is broken (later learned that vandal youths did it to several people).  We turned the porch lights on and 10 minutes later there is arc lightning coming out of one and trying to start a fire.  Oh my, what an omen.  I take the next 2 days to relax, process pictures from Alaska, finish the last post that I wrote on the trip, and prepare my plans for MCW.


I have decided that if I am going to do this I am going to do my best.  I made appointments with the two past presidents and took several emails from other officers.  We have a great relationship with the Woodworkers Club and they are going through a move to a bigger space and we (now me) need to make sure we do all that we can to keep them happy.  So I made a trip down there to make sure we are listening to them and supporting them.  Their move has been delayed, probably a month, because of the storms and building permits being suspended for emergency repairs.

The MCW website had moved to new platform and the update was coming close to the end of the first step.  I spend a lot of time qaing and checking out what it has to offer.  It reminded me of my software days... find a lot of things, get them fixed and find completely different things in the same place, how annoying. 


I held my first meeting on Thursday July 12th and it went well with 26 members and guests.  I had a lot of people presenting a bunch of items and I held it together pretty well.  


My son is completing his summer swimming carer so we spent time at the pool Wed. July 11th, and his final swim on Sat July 14th and he got to parade around in his Kingfish crown and robe.  And on the 22nd we made it to the swim team banquet, 2 1/2 hrs of talking about how much the kids want to swim and giving out crappy little trophies (they actually were pretty cheap this year).  This is followed by a great 30+ min video.  It is cool having professionals live in the neighborhood. 


On Monday July 16th I was presented with a coach of the year for coaching 11 teams over 8 years of kids volleyball.   I got a nice certificate and a very nice "participation trophy" (it is better because it is MINE!).  I am truly very touched.  I didn't plan out that one local web paper would have a story about it and then another local paper would have to do a story also.  


Finally last week my daughter was away at a hiking and leadership camp all week and I got a chance to get the chainsaw and lathe out, and rough out a some bowls from the few pieces of that storm wood that I found along the road.   Finally some Tim time.

Anatomy of an Entry.

Background

I subscribe to an ezine called Woodworkers Journal because it is free and they have some interesting articles.  They have a magazine by the same name.  In early June they headlined with a contest for amateur woodturners. 

It's a Contest! Turn, Turn, Turn! Issue: Issue 302 Posted Date: 6/5/2012

Are you a woodturner? Have your thoughts ever turned to fame and/or fortune? If they have, well you are in luck.As most of you know, Woodworker's Journal also has a print magazine, and, for this year's September/October issue, we are going to select four amateur woodturners to create a bowl from similar blocks of wood. All four turners will be featured in the print issue (fame!), and three will get a $100 gift certificate to Rockler Woodworking and Hardware (fortune!). The winner (the fourth contestant) will get a $150 certificate (even more fortune!).So, where will these woodturners come from, and how can you get in on the action? I am glad you asked! The woodturners to be featured in the print magazine will come from ... drumroll, please ... among our eZine readers! (I know, we're combining our media. Call me crazy. Wait a minute ...) Simply click here and fill out the entry form. From the entries we receive in the next seven days, we will select four contestants.
That's it. If you are selected, we'll send you a block of wood ... you'll turn a bowl, and send it back to us.
So click and sign up. You've only got seven days from today!
Rob Johnstone, Woodworker's Journal

All you have to do is fill out a form online.  I thought, What the heck? and put my name in. On Friday June 15 I found a package on my porch, an 8 x 8 x 3" block of myrtle.  There was a letter inside that stated I am one of 4 woodturners chosen to compete and I have until June 26 to finish.  A photographer will be contacting me for pictures of ME in MY SHOP for the magazine!  Thoughts rush through my head ...... YAY!  What should I make?  OH SHIT I go on vacation on the 21st can I do it and have the photographer here before I leave?  Did I get in over my head? 
I emailed Rob Johnson and asked if there was time before my trip or do I needed to send my wood back. He said that he could get the photographer there and we should be ok.  Wow. Now I have to make something.

The start of a branch on the top edge.

Sap wood (near the bark) to the left
 and heartwood to the right.

The Wooden Block

The block was nearly quarter sawn with the almost white sapwood on one side and nicely colored heartwood on the other.  The grain ran mostly parallel to the short side (quarter sawn ) except for part of the heartwood side that had small growth rings in the corner nearing the pith or center of the log.   There was a small circle in this section that was the start of a branch within the log.

What to make?

My first thought is always how big a bowl can it be and how can I get the most character from the wood.  For maximum character I would use the change in character near the center of the log and use the branch as interest.  But as I thought about the limited time, I would have to turn this once and let it dry and hope that it didn't distort too badly.   I chose to avoid the center and turn that away to avoid too much drying distortion.  If I had time and another piece of wood I would try for character but I will still try and make the largest bowl I can.  Note my "thought scratches" in the wax in the picture below.  

Note the grain, especially in the upper left
 as it gets closer to the center of the log.

Process

The biggest thing you have to think about  in woodturning is how will you hold the wood so that it is secure and you are able to access the angles you need to make the cuts.  After years of turning I have my usual style that has been developed from tools that I have and how safe I feel with the wood spinning at speed.  Since I have decided where the hollow part of the bowl will be I can screw a small faceplate in the center and bring up the tailstock for more security. 

Block attached to the lathe with a faceplate.

The block was sealed with wax to slow drying and when I started cutting I noticed that is was still pretty wet.  I try to turn the best curve I can. This is where I have issues with my skills in making a constant curve and have it look good. I did OK on this curve but it was a struggle.  While turning the outside of the bowl, an oval design emerged from where the grain turned toward the center of the log.

I turned a thin tenon on the base with the roughed base slightly larger than the tenon for my chuck to rest on. 

Still on the faceplate with tenon ready for the faceplate.

Tenon put in the chuck
for hollowing out the bowl.

Move tailstock up for safety. 

I the put the bowl in the chuck and turned the inside.  I kept the side fairly thick to be on the safe side on a one-chance-only piece of wood.  I sanded from 150 grit to 400 grit with some sanding sealer to try and help with the wet wood.  I decided that since it might move as it dries I would burn some rings around the rim.  This shows that the rim was round at one time if it moves.  I stopped at 2 lines because that looked right. 

During the hollowing of the inside.

I let it dry for the night and not much happened.  I was running out of time so I decided to turn the base.   I used a donut chuck to secure the bowl and make a nice base.   I centered the bowl with the tailstock in the hole I used at the start. I made the base thinner and concave with 2 circles for decoration and room for my initials. I sanded the base, removed it from the donut, cleaned up the donut marks and let it dry for about 24 hrs.  I know that is not long enough to dry but I am constrained by time.

Using the tailstock hole in the base,
 I center the bowl and secure it.

Donut chuck from the side.  Burn lines visible.  

Base is turned down, sanded, and decorated.

Finishing

I wanted to try and do something easy and quick to finish it.  I had been experimenting with walnut oil and it makes the grain pop.  So I put a coat on it and let it sit.  The next day I wiped it down and rubbed it in and let it sit and dry for another day.  I would buff it out with carnauba wax before it ships out. 

While waiting I cleaned up the shop to prepare for my photo session.  My shop is so small and packed with junk that the only way to be seen while turning is to turn the headstock 90 degrees to the bed. I pulled out a large dry maple bowl and trued it to see if I can get shavings flying on command.

Wednesday My Final Day

As my daughter can attest, I was pretty anxious.  10 am came and Donna Chiarelli promptly showed up for my photo shoot.  It went smoothly and I hope she can photoshop my waistline!  Love a professional with the right tools and a clear plan. 

Just after the photo shoot,
she brought her background to hopefully catch chips flying.

Here is Donna with pole for one light and
a small part of the other one.

After she left I set up my buffer to wax the bowl.  I got my burning tool out to put my initials on it and started to panic that I shouldn't sign it.  I reread the rules and decided that they did not say anything about it.   I used the three part buffing system ending with the carnauba wax.  It was looking good!  I started hand rubbing with a cloth.  I needed pictures for me, so I took it out on the deck and shot some in the hot sun as my natural light.

Sap wood.

Profile with burnt rings.

Character from the oval formed by
getting closer to the center of the log.

Base detail.

Quarter sawn grain patterns.

Outside oval pattern.

It was a hot day so as I was shooting the bowl it started to cry....literally water was beading up, straight from the grain.  It was mostly from the sap wood, which makes sense since that is where most of the water flows in the tree.  I decided that this would be good to try and get the water out, so I left it out in the sun and checked in on it often and cleaned the water off.  

Did not think to document the crying
until the end with just a few drops.

Here you can see a few more drops.

After about an hour, it stopped weeping and I pulled it in and cleaned it off, let it cool some, and boxed it up.  Used their FedEx label, and off to Parcel Plus with fingers crossed that all goes well and it shows well.  I doubt I will win but think I won by completing the project.